Торгово-складская линия: нижние уровни для ручного отбора и выкладки, верхние — для паллетного резерва.
For the “Cash & Carry racking” system, prepare these three sets of inputs. Continue with the questionnaire to refine the parameters before calculation.
Select the storage unit and enter its dimensions and weight.
Enter the level load, loading method and picking mode.
Execution and the number of bays determine the line length on the plan.
Рассмотрите размещение груза и узлы системы «Cash & Carry». Проектные иллюстрации помогают выбрать компоновку; рабочие размеры и комплектность определяются спецификацией.
Cash & Carry racking combines accessible display and pallet reserve in one row. Match lower shelves to the range, upper levels to pallets and replenishment procedures to customer and picker movement.
Compare configurations: Pallet reserve + picking; Longspan + pallet reserve; With price-label holders; With baskets and dividers. Provide load dimensions, weight, packaging and issue frequency for selection.
Cash & Carry combines display, manual picking and reserve stock in one row. Lower shelving or longspan levels hold cartons and individual items, while upper levels hold pallets. The configuration follows the assortment, packaging, weight, replenishment frequency and rules for people and equipment working together.
For Cash & Carry, compare Pallets, cartons and individual items, access, turnover, the number of stock items and compatibility with the actual handling equipment.
Specify the equipment for your warehouse: Pallet frames and beams, Lower shelving or longspan levels, Dividers and price-label holders, End protection and guards. First define capacity and storage geometry, then select elements for the load and access method. Compare configurations to obtain a quotation for the selected structure. An engineer checks load-bearing elements and connections against the facility data.
For «Cash & Carry» receive geometry rows, nominal to positions and preliminary scope — input data for engineer verify and commercial offer.
The layout separates the customer or picker aisle from the replenishment route. It checks first loaded level height, access to goods, visibility, end protection and handling of upper pallets. Pallet and shelving parts are calculated as one structure.
With layout «Cash & Carry» on scale verify to, in, walls, equipment, working and cross aisle, zone acceptance, picking, replenishment and dispatch.
Operating procedures define replenishment times, closure of the hazard zone, level loads and placement of heavy goods. Price-label holders and dividers must not reduce clearances or obstruct inspection. Changes to the pallet load, levels or display require another check. To approve Cash & Carry, provide the building plan, floor and truck specifications, maximum loads and handling process. These inputs distinguish a preliminary calculation from the detailed design.
For «Cash & Carry» grade load, periodic inspection, recording damaged and approval rearrangement levels save calculation diagram equipment.
Выберите отраслевую задачу и сравните требования к грузу, доступу и комплектации. Подберём «Cash & Carry» с учётом процессов вашего склада.
For “Food warehouses”, “Cash & Carry” is designed around “Pallets, cartons and individual items” loads and “Customer or picker below, handling equipment above” access. The key check is batch tracking and FIFO; the solution may include galvanized configuration by confirm special.
Решение для отрасли →Склад и логистикаFor “Retail warehouses and Cash & Carry”, “Cash & Carry” is designed around “Pallets, cartons and individual items” loads and “Customer or picker below, handling equipment above” access. The key check is pallet reserve above the picking zone; the solution may include shelves, baskets, price-label holders and protective perimeter.
Решение для отрасли →Склад и логистикаFor “Building materials storage”, “Cash & Carry” is designed around “Pallets, cartons and individual items” loads and “Customer or picker below, handling equipment above” access. The key check is truck manoeuvres beside the picking area; the solution may include selective pallet rows for packaged materials.
Решение для отрасли →Sections and configurations of this type. Specifications and selected quantities are saved in your request.
Open in shop →Every stage for the “Cash & Carry racking” system is adapted to its load, access technology and equipment scope. Input, design and specification versions never replace one another.
We record the request for “Cash & Carry racking”: load — Pallets, cartons and individual items; access — Customer or picker below, handling equipment above; flow — Replenishment + sales / picking.
The “Cash & Carry” quiz captures load dimensions and weight, building data, equipment, aisles and required capacity.
On the plan, we check how “Cash & Carry” rows fit between columns, doors and service zones without blocking operating aisles.
For “Cash & Carry”, we calculate geometry, module and level counts, nominal capacity and user-entered loads for Pallets, cartons and individual items.
The “Cash & Carry” scope is broken down into Pallet frames and beams, Lower shelving or longspan levels, Dividers and price-label holders; configuration options include Pallet reserve + picking, Longspan + pallet reserve, With price-label holders.
We agree the “Cash & Carry” supply scope, dates, installation, input assumptions and items requiring engineering approval.
Production receives the approved “Cash & Carry” design revision with dimensions, connections, quantities and component marking.
“Cash & Carry” components are manufactured to approved drawings; unapproved profile or connection substitutions are not permitted.
We verify “Cash & Carry” component quantities and marking, coating, fasteners, guards and accompanying documents.
“Cash & Carry” packages follow the installation sequence so frames, levels and guards arrive as complete sets.
The “Cash & Carry” route and unloading plan account for component length, package weight, site access and temporary storage.
“Cash & Carry” rows are installed to the detailed design; geometry, anchoring, guards, load signs and completeness are checked.
For “Cash & Carry”, we retain inspection, damage and change history; expansion uses compatible components and the current design revision only.
Confirm the inputs for the “Cash & Carry racking” system. Your answers become the parameters of this rack in the warehouse planner.
Дополните «Cash & Carry» совместимыми элементами: выберите параметры и количество для расчёта комплектации.
Основная секция · PF-STD · D1000
Дополнительная секция · PF-STD · D1000
Основная секция · PF-STD · D1000Укажите груз, помещение, технику и ожидаемый поток. Если есть план объекта, его можно передать ответом назначенному менеджеру после регистрации заявки.
Rack manufacturing starts with load dimensions, weight per level and the building layout. Profiles, connections and finishes are selected against the agreed specification. Geometry, markings and the completeness of the assembly kit are checked before dispatch.
The photographs show Maxstore production facilities. The project specifies the components and permissible loads for your warehouse.
