Frame M110 is a load-bearing frame component for front pallet, drive-in and mezzanine racking. Select dimensions and quantity to add the exact configuration to a Maxstore request.
Compare length, thickness and installation parameters, save the selected option in the request and have a Maxstore engineer verify compatibility with the racking system.
The diagram explains geometry and load parameters. It is not to scale and does not replace a manufacturing drawing.
| Metal thickness | 2 mm |
|---|---|
| Available lengths | 1 800; 2 000; 2 500; 3 000; 3 500; 4 000; 4 500; 5 000; 5 500; 6 000; 6 500; 7 000; 7 500; 8 000; 8 500; 9 000; 10 000; 11 000; 12 000; 13 000; 13 600 mm |
| First loaded level | 900; 1 200; 1 500; 1 800; 2 100; 2 400 mm |
| Load | Per bay formed by a pair of frames |
Selection uses only published parameter combinations. Another required length can be recorded in the request for a separate engineering check.
The selected configuration is present in the published specifications table.
Open the complete storage system to compare the component with the load, access method and warehouse process.
Direct access to every pallet, from a single bay to a high-bay multi-row system.
Open system →02High-density storage of uniform batches in deep pallet lanes.
Open system →11Pallet storage below with manual picking or a work area on the upper level.
Open system →13One multi-level system combining columns, pallet racking and shelving for mixed flows.
Open system →
